skip to Main Content
MAX-LIFE™ HARROW TINES
010-HAR-3817ML
FITS: Bourgault

The tine is 3/8″ (9.5 mm) diameter, 8″ (203 mm) wide and 17″ (432 mm) high. Heat applied, embedded carbide has been added to the tip of the tine.

010-HAR-5000ML
FITS: Salford

The tine is 1/2″ (12 mm) diameter, 10″ (254 mm) wide and 20″ (508 mm) high. Heat applied, embedded carbide has been added to the tip of the tine.

010-HAR-5022ML
FITS: Elmer
The tine is 1/2″ (12 mm) diameter, 10″ (254 mm) wide and 22″ (559 mm) high. Heat applied, embedded carbide has been added to the tip of the tine.
010-HAR-5625ML
FITS: Bourgault, Brandt, Degelman, Flexi-Coil, Rite Way & Summers

The tine is 9/16″ (14 mm) diameter, 12″ (305 mm) wide and 26″ (660 mm) high. Heat applied, embedded carbide has been added to the tip of the tine.

010-HAR-6250ML
FITS: Bourgault, Brandt & Degelman

The tine is 5/8″ (15 mm) diameter, 12.5″ (318 mm) wide and 27″ (686 mm) high. Heat applied, embedded carbide has been added to the tip of the tine.

MAX-LIFE™ SPIKES
410-SPK-0200ML
FITS: 200 Series Speed-Loc™ (47° Shank)

The spike is 2” (50 mm) wide, 5/8” (15 mm) thick and 9” (230 mm) long.

Heat applied, embedded carbide has been added to the leading edge of this heavy-duty quick change spike. It has a hardened wear pad (52-56 HRC) for extra life.

This tool is ideal for primary tillage or banding fertilizer.

200-SPK-0200ML
FITS: 200 Series Speed-Loc™ (47° Shank)

The spike is 5/8” (15 mm) thick, 2-1/4” (57 mm) wide and 6” (150 mm) long.

Heat applied, embedded carbide has been added to the nose of this quick change spike. It has a hardened wear pad (52-56 HRC) for extra life.

This tool is ideal for primary tillage or banding fertilizer.

MAX-LIFE™ SWEEPS
200-PWV-0405ML
FITS: 200 Series Speed-Loc™ (47° Shank)

The sweep is 1/4” (6 mm) thick and 4” (100 mm) wide.

Heat applied, embedded carbide has been added to the underside of this sweep. It is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases the life expectancy.

The nose on this sweep runs 1/2” (12 mm) lower than the other 200 Series sweeps. This increased pitch improves penetration in hard or compacted ground.

410-PWV-0418ML
FITS: 410 Series Speed-Loc™

The sweep is 5/16” (8 mm) thick and 4” (100 mm) wide.

Heat applied, embedded carbide has been added to the underside of this sweep. The sweep has a 3/8” hardened wear pad (52-56 HRC) for longer life. This sweep runs at a 13° pitch, which is steeper than the regular 410 sweep.

Back To Top