skip to Main Content
1-800-878-7714 Catalogues & Brochures

Seed Placement: The seed is placed 3/4” (19 mm) above and to the side of the fertilizer row, after the carbide wafer under the tip’s wing seals the fertilizer trench and firms up the seed bed. The GP & LP openers deliver phosphorus on top of the seed.

Fertilizer Placement: Fertilizer is placed in the center 3/4” (19 mm) below the seed bed. The carbide wafer under the wing seals the fertilizer trench before the seed is placed. In less than ideal conditions, mixing between seed and fertilizer may occur. For more information please refer to precautions & risk factors.

Replaceable tip: Cast chrome tip with extra long carbide inserts on the nose of the tip for excellent penetration and wear resistance. Top face of wing is covered with two carbide inserts providing excellent wear resistance. Carbide wafer under the wing to seal fertilizer trench, and firm the seed bed prior to seed placement. Assemblies on this page include the tip.

Packer Recommendation: 3″ (76 mm) or wider. V-Packer not recommended with these openers.

Opener Features: Hard facing is placed on critical wear points to ensure a long-lasting holder, proper seed placement. The streamlined holder design reduces plugging and allows for better trash clearance.

Installation Notes: Use 1/2” x 2” Grade 8 Hex Head bolts to install 684 openers.

Use 1/2” x 2-1/4” Grade 8 Hex Head bolts to install 694 openers.  Sold separately. 

When installing 684 openers use bottom holes for standard installation (pictured red), use top holes to add 3° more pitch (pictured yellow).

All wings on Side Band openers must be pointing inward to the center of the seeding unit to prevent plugging when turning. Customers should order half left and half right wing openers. 

Granular N_2017

Granular N

Granular N + Liquid Phosphorus_2017

Granular N + Liq Phos

Liquid N_2017

Liquid N

Liquid N + Liquid Phosphorus_2017

Liquid N + Liq Phos

These Side-Band Openers fit

Case IH ATX 700

New Holland P2060

Flexi-Coil 5500

(84° Shanks Only)









Case IH 800

New Holland P2070

Flexi-Coil PD5700









For a more detailed view check out the expanded drawing

Back To Top