1-800-878-7714 info@tillagetools.com Catalogues & Brochures
All of our replaceable tips are made in North America, giving you the superior wear resistance you have come to expect from us. They are cast by Leth Iron in Lethbridge, Canada using only the best materials available, so we can offer you the highest quality tips on the market. All carbide inserts used on our tips are North American made and attached in-house ensuring the highest standards of quality are met.

200-TIP-0511

Carbide Tip

1/2″ (12.7 mm) with carbide insert on the nose.

200-TIP-0800

Chrome Tip

3/4” (19 mm) tip.

200-TIP-0801

Carbide Tip

3/4” (19 mm) tip with carbide insert on the nose.

200-TIP-0802

Carbide Tip

3/4” (19 mm) tip with extra long carbide on the nose for highly abrasive conditions.

200-TIP-0803

Carbide Tip

3/4” (19 mm) tip with extra long carbide on the nose and sides for highly abrasive conditions. The same as 200-TIP-0802 but with the addition of the side carbide inserts.

200-TIP-0811

Vertical Tip

3/4” (19 mm) vertical tip with extra long carbide on the nose for highly abrasive conditions.

200-TIP-1011

Vertical Tip

1” (25 mm) vertical tip with double carbide insert.

200-TIP-2011

Carbide Spread Tip

2” (50 mm) tip with carbide insert on the nose and underside of the wings.

200-TIP-3000

Chrome Spread Tip

3” (76 mm) tip.

200-TIP-3001

Carbide Spread Tip

3” (76 mm) tip with carbide insert on the nose and hard facing on the underside of the wings.

200-TIP-3011

Carbide Spread Tip

3” (76 mm) tip with carbide insert on the nose and underside of the wings.

200-TIP-4011

Carbide Spread Tip

4” (101 mm) tip with carbide insert on the nose and underside of the wings.

610-TIP-0802

Carbide Tip

3/4” (19 mm) long-wearing single shoot tip. Used for seeding only. Fits VOS (Versatile Opener System) Find out more.

200-BNC-3100

Bolt & Nut Combo

This bolt and nut combination is used to secure tips with product numbers beggining in 200, 610, 612 & 614. It is important not to over tighten the bolt when installing the tips. The bolt has a strip of thread lock applied to the threads, so it needs only to be turned in by hand until the shoulder of the bolt makes contact with the nut.

The nut, 200-NUT-3101, and bolt, 200-BLT-3102, can be ordered separately.

Over torquing with a power drill will result in difficulty when removing. Recommended to torque to 84 in/lbs or 7 ft/lbs.